By Usage
Technical ceramic processing
Choose the finished product and process closest to your project. Then open its application brief to define the problem, comparison conditions and evidence needed.
MC / HPMC · Technical ceramic processingAqueous ceramic extrusion
Where does the body deform, crack or become difficult to extrude?
Open this route →Forming, green strength and binder removalSolvent-based ceramic pastes
Is the issue paste consistency, green-body integrity or thermal removal?
Open this route →What to share with JNP
Choose the finished product and process closest to your project. Then open its application brief to define the problem, comparison conditions and evidence needed.
- Aqueous ceramic extrusion: Ceramic powder, water, mixing, extrusion and drying
- Solvent-based ceramic pastes: Ceramic powder, organic solvent, paste preparation and thermal processing
What still needs confirmation
Use these application guides to describe your product and process. They do not provide a tested JNP formulation or confirm grade suitability. Product names are starting points for discussion; agree the candidate and trial conditions before testing.
Trial and acceptance criteria
Record the current formulation, process settings and comparison sample. Agree the test method and acceptance criteria before comparing candidates. No JNP application trial result is published on this page yet.
Documents and application evidence
Request product-name TDS and SDS, selected-grade specifications and sample-batch CoA. Intended use and destination-market requirements require separate review. Application reports, process photographs and customer-approved cases will be added only after verification.