By Function
Forming, green strength and binder removal
Start with the result you need to evaluate, then choose the production context below. A shared function does not make materials or grades interchangeable.
MC / HPMC · Technical ceramic processingAqueous ceramic extrusion
Does the failure begin during mixing, at the die, in green-body handling or during drying?
Open this route →EC · Technical ceramic processingSolvent-based ceramic pastes
Does the failure begin in paste preparation, forming, drying or binder removal, and what solvent vehicle is used?
Open this route →What to share with JNP
Start with the result you need to evaluate, then choose the production context below. A shared function does not make materials or grades interchangeable.
- Aqueous ceramic extrusion: Does the failure begin during mixing, at the die, in green-body handling or during drying?
- Solvent-based ceramic pastes: Does the failure begin in paste preparation, forming, drying or binder removal, and what solvent vehicle is used?
What still needs confirmation
Use these application guides to describe your product and process. They do not provide a tested JNP formulation or confirm grade suitability. Product names are starting points for discussion; agree the candidate and trial conditions before testing.
Trial and acceptance criteria
Record the current formulation, process settings and comparison sample. Agree the test method and acceptance criteria before comparing candidates. No JNP application trial result is published on this page yet.
Documents and application evidence
Request product-name TDS and SDS, selected-grade specifications and sample-batch CoA. Intended use and destination-market requirements require separate review. Application reports, process photographs and customer-approved cases will be added only after verification.